Major equipment on the following:

 

A.Feeding Rolling Table (front) (GTB.1):Positioning separation, multi-sheet after a separation then a subsequent transportation to the next procedure.

 

B. Longitudinal Double End Tenoner Machine (DTE):A pair of vertical sheet molding, five of the 10 axis preparation. Precision control for the level of bad 0.02-0.05 mm, straightness 0.05 millimeters per meter.

 

C. Longitudinal Brush Dust Machine (SGP01):In vertical slotted right after brushing the surface of the work piece with ash.

 

D. Feeding Rolling Table (central) (GTB.2):Vertical processing will be completed sheet into the next process.

 

E. Automatism Feeding Rack (GT):Right transportation to the plate in the precise location of a single-chip stocks after separation into the next process.

 

F.Electrical Control System (GT.D): The coordination of the whole production line control.

 

G. Transverse Double end Tenoner Machine (DTEH):The two ends of a pair of sheet molding. Precision control for the level of bad 0.05 mm, straightness 0.05 millimeters per meter, vertical degrees of 0.05 mm / 100.

 

H. Feed out belt conveyor:From transverse DET machine feed out boards and then convey.

 

I. Longitudinal Brush Dust Machine (2) (SGP02):In vertical slotted right after brushing the surface of the work piece with ash.

  Feeding Rolling Table (front)

1.Length: 2400 mm

 

2.Width: 600 mm

 

3.Speed: Can Adjust, 30-80 m/min

 

4.Motor Power: 1.1 KW

 

5.Weight: 200 KG

 Longitudinal Double End Tenoner Machine 

 

1.Working width: 100-600 mm

 

2.Working thickness: 4-20 mm

 

3.Height of working surface of table: 1100(Mainframe All Height 1100 mm)

 

4. Rotate speed of cutter shaft: 6000-7000 rpm

 

5.Feeding speed: 30-80 m/min          

 

6.Motor Power: DTE06-12D

 

Station 1, 2 main spindle motor:    4X8 KW

 

Stations 3,4,5,6 milling spindles: 8X5.5 KW

 

7.Feed-in Motor:               7.5   KW

 

8.Cutting Tool Diameter: Φ250-Φ280XΦ40

 

   Cutting tools such as compact sets up a hydraulic motor in need of special note. To ensure 80 meters per minute processing capacity, the proposed use of hydraulic sets up tight.

 

 

 

9.Dust Absorbing Inlet Diameter

 

 

 

Stations 1, 2 , 3 , 4 ,5,6: Φ120mmX12

 

 

 

Transmission chain dust absorbing: Φ100mm

 

 

 

10.Weight:        9000 KG

 

 

 

Longitudinal Brushing Machine (SGP01)

 

 

 

1.Width:   600 mm

 

 

 

2.Height: 1100 mm

 

 

 

3.Power:   1.1 KW

 

4.Weight: 100 KG

 

 

 

 Feeding Rolling Table (central) 

 

 

 

1.Length: 2400 mm

 

 

 

2.Width:600 mm

 

 

 

3.Speed: Can Adjust,30-80 m/min

 

 

 

4.Motor Power:1.1 KW

 

 

 

5.Weight: 200 KG

 

 

 

Transverse Double End Tenoner Machine(DTEH18-12D)

 

1.Working length: 600-1800 mm (special configuration working length:400-2500mm)

 

 

 

2.Working Width: 90-600 mm

 

 

 

3. Working thickness: 4-20 mm

 

 

 

4.Height of working surface of table: 950 mm (Mainframe All Height 1100 mm)

 

 

 

5.Rotate speed of cutter shaft: 6000-7000 rpm

 

 

 

6.Feeding Speed: 15-40 m/min

 

 

 

       7.Motor Power:

 

 

 

Station 1, 2 ,3,4,5,6 milling spindles: 12X5.5   KW

 

 

 

             Feed-in motor:          7.5   KW

 

 

 

             Width adjusting motor: 1.1   KW

 

 

 

7.Cutting Tool Diameter:Φ220-Φ250XΦ40

 

 

 

   Cutting tools such as compact sets up a hydraulic motor in need of special note.

 

 

 

8.Dust absorbing inlet diameter:

 

 

 

     Stations 1, 2, 3, 4, 5,6:           Φ120mmX12

 

 

 

Transmission chain dust absorbing: Φ100mmX2

 

 

 

9.Weight:       9500 KG

 

 

 

 Brushing Machine (SGP02)

 

 

 

1.Width:   600 mm

 

 

 

2.Height: 800 mm

 

 

 

3.Power:   1.1 KW

 

 

 

4.Weight: 100 KG